Semi-Automated Two-Axis Tracking

The InteliTrack 2000A Rail Tracking System provides two-axis tracking for high energy production with simplicity and cost reduction.

East/west tracking is fully automated, driven by linear actuators. North/south adjustments can be made very easily a few times a year, to produce high output without the cost of two-axis automation.

We recommend the InteliTrack 2000A system for ground-mounted sites and for commercial, residential and utility customers who want high energy output at lowest installed cost.

  • Semi-automated two-axis tracking for highest year-round energy production
  • Fewer panels needed means lower system cost
  • Only two moving parts means reliable operation over many years
  • All materials are impervious to salt-spray corrosion
  • Wind rating up to 150 miles per hour
  • Distributed weight load
  • No need for concrete foundation

Download the data sheet

Download the installation manual

  Model 2000A-090S 2000A-120S 2000A-150S
  Wind rating 90 mph 120 mph 150 mph
  Panels 4 panels per frame, up to 85″ X 45″
  Controller Lauritzen
  Actuator Linear electric
  Bearing Self-lubricating, UV-resistant polymer
  Rotation Azimuth -45° to +45°Elevation -10° to +120°
  Backtracking Yes – east/west adjustment to prevent one panel shading the next
  Outer frame  Aluminum
  Panel supports Aluminum
  Installed dimensions (maximum)  Height 96″, length 120″, width 96″
  Weight  175 pounds
  Wind protection  Panels in “park” protective mode when winds is greater than 40 mph
  Operating temperature  -22°F to 149°F (-30 C to +65 C)
  Ground coverage ratio  0.30 to 0.40
  Warranty  10 years
  Manufactured USA

 

™ InteliTrack is a trademark of Sedona Solar Technology.

  • 1.928.300.9344

  • Request Information